The compactor garbage truck is composed of a sealed garbage hopper, a hydraulic system and an operating system. The whole truck is a fully sealed type, and the sewage in the process of self-compression, self-dumping and compression all enters the sewage tank, which completely solves the problem of secondary pollution in the process of garbage transportation. It has the advantages of good performance, convenient operation and safety. Optional rear hanging bucket overturning mechanism or garbage bucket overturning mechanism.

The outstanding features of the compactor garbage truck and other garbage trucks:

1. The garbage collection method is simple: change the dirty old appearance of garbage cans on the streets of the city, and prevent secondary pollution.

2. High compression ratio and large loading capacity: the maximum crushing pressure is 12 tons, and the loading capacity is equivalent to two and a half times that of the same ton of uncompressed waste.

3. Operation automation: The imported computer control system is adopted, and the driver is required to operate all the loading and unloading operations, which not only reduces the labor intensity of sanitation workers, but also greatly improves the working environment.

4. Good economy: When the special equipment is working, the computer control system automatically controls the throttle.

5. Double insurance system: The operating system has dual functions of computer control and manual operation, which greatly guarantees and improves the utilization rate of the vehicle.

6. Turning mechanism: optional turning mechanism with garbage can (or bucket).

Problems and countermeasures of compactor garbage trucks.

1. The operation noise is high

Domestic compression garbage trucks generally have problems such as loud operating noise and disturbing people. When designing and manufacturing garbage trucks, the vehicle chassis, engine and power take-off should be carefully selected, measures should be taken to enhance the stability of the system movement, reduce noise, use materials that can absorb noise, and structural design should be able to reduce vibration: through the hydraulic system and The optimized design of the loading mechanism improves the machining accuracy and assembly quality to achieve the purpose of reducing vehicle operating noise.

2. Poor airtight reliability

Since domestic waste has the characteristics of solid-liquid mixture, in order to achieve no leakage of landfill percolation in the process of collection and transportation, the following methods can be used to solve it.

(1) Install an edge baffle between the stuffing hopper and the stuffer to prevent the garbage from leaking out.

(2) The floor of the carriage should have a certain slope to prevent the leakage of landfill leachate.

(3) A sewage tank is installed at the lower part of the packer to store the sewage dripping between the carriage and the packer.

(4) Strengthen the seal of the connection between the filler and the carriage to prevent the leakage of garbage and the leakage of garbage leachate during the compression process.

3. Low load mass utilization rate

Reducing the self-mass of the compressed garbage truck and improving its load utilization rate will reduce the operating cost of the vehicle. Due to the complex structure of the compression garbage truck and the large self-mass, the vehicle chassis should give priority to the domestic chassis with high technical content, good dynamic performance, light self-weight and high cost performance in the design: high-strength materials are used to reduce Self-quality of the body; auxiliary parts such as fenders, decorative parts, cover plates, etc. can be made of injection molded parts with lower density, and parts with a higher degree of integration can be used to reduce space occupation and self-quality, and at the same time, it is beneficial to improve the hydraulic system. work performance.

4. Operating comfort

Improving the comfort of driving operation can reduce the labor intensity of driving operators. In order to improve the handling performance, the mechanical control is changed to electronic control, and an electronic monitoring system is equipped.